Data Loggers, Portable Remote Site Loggers, Low Power Multi-Channel

The MINI-2 is a ruggedly packaged rectangular module that contains the system microprocessor, data storage memory, signal conditioning circuitry for the single digital inputs, User switches, RS-232 port and ancillary circuitry. Specifications are identical to the MINI-1 with the exception that the MINI-1 includes the four analog inputs.

Digital Input and Alarm Outputs

The Mini-2 is equipped with a single software configurable General Purpose Digital Input that is ideal for logging of events or hi-speed counting of digital signals from flow meters, encoders, or other pulse-train type sources. The Mini also provides isolated alarm relay outputs, a TTL alarm output, a Status LED and a regulated, current-limited 5VDC output, all controllable under software.

User Interface

Enable, Stop and Reset switches as well as LED status indicators are provided at one end of the Mini module. Input and Output wiring is handled through pluggable terminal strips which allow for simple mass connection and disconnection of wiring.

ML-DISP	Display Module - Plug-on module adds a two-line by 16 character liquid crystal display and relocates User switches to the front panel. Displayable messages include current readings, last stored data, User programmed messages, and logger operational status. Module installs on top.
Option -EXM	Memory Expansion - Expanded memory option for the ModuLogger System Base. This factory option expands internal logger memory from 16,000 samples to 80,000 samples
ML-BATT	Battery pack option. Includes 6 alkaline D-Cells in holders, typically providing 1 to 3 months of autonomous data logging.
ML-PSM2	Power Supply Module. Plug-on module that provides a low-power step up power supply for applications requiring sensor or loop power/excitation greater than the ModuLogger's internal 5Vdc source. The ML-PSM2 can provide 10, 15, or 24Vdc excitation voltages stepped up from an external power source.
ML-BATT-PSM2	Battery and Power Supply Module - ML-BATT combined with ML-PSM2. This module can logger power and 10, 15, or 24Vdc excitation voltages stepped up from the ModuLogger system batteries.
MLIM-5	Memory Card Module. Plug-on module includes socket for removable memory cards.
MLIM-5-144	Plug-on module includes socket for removable memory cards and integral low-power, plug and play 14.4Kbaud modem. (Modem does not use the memory card socket)

Removable Memory Cards	PCMCIA memory cards allows for easy removal and transport of collected data. Additionally, cards are available to expand memory capacity to in excess of 500,000 samples.
ML-300	A ModuLogger system housed in weatherproof enclosure for system integration of cell phone, rechargeable batteries, transducers, etc.
HAP; Polling Software	HAP is an accessory software application that automates the communication, data downloading, file conversion and even report generation process from one or multiple HyperLogger™ and/or ModuLogger sites. .
Cell Phone Option	The HyperLogger™ can be supplied with a cell phone option, resulting in a truly autonomous data logging platform.
Ethernet Communication	Connect the HyperLogger to an Ethernet LAN.
Combo Pak	Includes software, manual, cables, connectors, and AC adapter.